
Custom Printed Skateboard Wheels
Custom Printed Wheels
Custom Printed Wheels
Our flexible Custom Printed Skateboard Wheels program allows the same graphic to be printed on the many different types & sizes of wheels we carry. We create the films, burn our own plates and have multiple pad printers in-house, so our turnaround time is usually less than a week.

Printing Options
Custom Printed Wheels

Pad Printing
The ink gets transferred from an etched plate to a silicone pad. This silicone pad is then pressed on the surface of the skateboard wheel to apply the ink. This simple-sounding process is quite complex. From the making of the plates to the actual printing, every step has to be carefully monitored and controlled. Temperature, humidity, etch depth, pad hardness, thinner/ink mixture, and many other factors influence the skateboard wheel printing process.

1 to 6 Colors
Our pad printers can print up to 6 colors per graphic. We prefer printing spot colors but can print the four-color (CMYK) process. Keep in mind that a plate is required to make each color, so fewer colors in the graphic will reduce the setup and print fees per wheel. We do suggest but don’t require printing a white base under the ink colors to help reproduce colors correctly and give you the best looking custom printed skateboard wheels.

Multiple Sizes
Wheel Options
Wheel Options

In-Stock Options
Type "t" Classic
High grade T.D.I.( toluene diisocyanate) polyurethane with good rebound and great abrasion resistance. This is our original formula. It is a great all around wheel. 99a durometer. Other colors available. “Stock Program” 25 sets minimum for custom printing order.
Type "t" Conical
High grade T.D.I.( toluene diisocyanate) polyurethane with good rebound and great abrasion resistance. This is our original formula. It is a great all around wheel. 99a durometer. Other colors available. “Stock Program” 25 sets minimum for custom printing order.
- 50mm
- 51mm
- 52mm
- 53mm
- 54mm
- 55mm
- 56mm
- 58mm

Build to Order Options
Build to Order Options
Type "d"
Type "PC"
High grade T.D.I.( toluene diisocyanate) polyurethane 98a outer. The inner core is made of a hard polymer, harder than our formula ‘D’, this allows for a slightly softer outer with a little more grip and a lightweight wheel. The polymer core and a thinned out bearing seat make for a lightweight wheel. “Build to Order Program” 250 set minimum.
- 50mm
- 51mm
- 52mm
- 53mm
- 54mm
- 55mm
- 56mm
- 58mm





Type "lb"
Get these custom longboard wheels in an order as low as 25 sets in assorted sizes. Make sure to set your artwork up to fit all sizes.
If you want custom manufactured longboard wheels with more choices such as durometer, color, and custom shapes the minimum starts at 250-1000 sets. Significant mold charges may be required as well as a large minimum order for custom mold shapes. Longboard skateboard wheel manufacturing is quite complicated!
The internal core is injection molded while the outer is polyurethane that is gravity poured around the plastic core.
3d files are required to make custom molds. An engineer is usually required to make these files. IGES is the preferred file format.
- 76mm X 53mm - 78A
- 70mm X 51mm - 78A
- 65mm X 41mm - 78A
- 65mm X 32mm - 80A
- 58mm X 32mm - 80A