Custom Longboard Decks
how our Longboards are produced
We only make top quality custom skateboard decks for professional use. Usually 7 ply, but 8 & 9 ply can be made in a custom press run, of premium maple sourced from the Great Lakes region are ran through a glue application machine. These veneers are put into a hydraulic press containing the mold top and mold bottom (mold determines concave) for 1.5-2 hours at room temperature (known as cold pressing). Post mold the laminated rectangle blanks (un-cuts) are allowed to cure for 4-7 days in large stacks. Truck hole drilling and shaping by template or CNC router happens next. Edges are routed and then bladder/balloon sanded. Surface sanding is next and then a coat of lacquer. Lacquer is allowed to cure and followed by more sanding and a final lacquer coat. This how a premium professional skateboard deck is made.
Custom Longboard Shape Options
Custom Skateboard Manufacturing Longboard shapes & sizes
Drop Through Shape
You've got questions we've got answers
Yes, we do it all the time. Just make sure you set your art to fit the largest deck, on smaller decks the graphic will just trim off a bit more.
We do. Please email email@example.com with what you are looking for. Please be aware that custom shapes have a larger minimum; 100 deck order, can be split 50 of one custom shape and 50 another shape if it uses the same laminate (mold and veneer size/color). The deck unit cost roughly follows whatever ‘stock’ deck is closest.
A similar looking shape but with a different width counts as a different shape as different shape template/programming are used for each width. 50 per shape within 100 decks in an order is minimum for a full custom shape. (Our stock shapes have no minimum).
First off we never knock-off any company, but if you want a really flat concave/mold we can check to see if we have something already made. We would need a CAD/3D file to make a full custom mold if that is what you want.
We don’t offer a carbon fiber option. In all the tests we have done carbon fiber doesn’t make a better skateboard deck than 7 ply hard maple. That’s just our opinion!
No. For outsourced products Point’s production team has been sourcing the products from the best factories for more than 15 years. Most of the substantial production happens offsite. We do keep many of the production parts like printing in Las Vegas for the fastest possible turnaround. Product origin is usually Mexico, USA, or China. You can rest assured that decks are only made with the best ingredients like the highest grade American/Canadian Maple with skateboard specific glue and the latest and best manufacturing techniques like cold pressing.
All skateboard products are made for and up to the standards of professional skateboarders. Samples of all products are available before ordering a production run for your brand.